Extra-charge Propellant 1.4 MPa Airsoft Green Gas (14 Bar)

Product Details

Benefits

Noticeable Energy Gain: Delivers increased muzzle velocity for improved external ballistics and effective engagement distance.

Sharpened Blowback: Produces a livelier cycling sensation and more pronounced recoil impulse for a realistic feel

Preservative Lubrication: Silicone additive helps protect O-rings and valves under more aggressive operation.

Consistent Mid-Match Output: Formulation resists rapid power loss so performance remains steady across magazines.

Tailored for Mods: Ideal where valves, slides, and seals have been upgraded or reinforced for higher pressure

Technical Details

Working Characteristics: Designed to provide a higher impulse per shot than standard green gases; actual in-gun pressures vary with temperature and fill technique.

Blend Profile: Predominantly propane with performance modifiers and a controlled silicone fraction to balance lubrication and minimize residue buildup. No ozone-depleting CFCs are used.

Temperature Sensitivity: Transfer efficiency and on-gun pressure rise with temperature—briefly warming the canister in cool conditions improves fill consistency.

Maintenance Note: Operating at elevated pressure increases inspection frequency for seals and valves compared with lower-pressure formulations.

Comparison — 1.0 / 1.2 / 1.4 MPa

• 1.0 MPa (10 bar): Lower-stress option suitable for stock and beginner platforms — softer recoil, modest FPS, gentle on factory internals.

• 1.2 MPa (12 bar): Middle ground that balances energy and longevity — widely compatible and a common choice for general-purpose play.

• 1.4 MPa (14 bar): High-output choice for reinforced or aftermarket-upgraded guns — greatest velocity and most pronounced blowback but requires compatible hardware and closer maintenance.

• Choose 1.4 MPa when your platform is built to tolerate higher operating pressures and you prioritize extra velocity and blowback realism.

OEM & Private-Label

We provide OEM manufacturing and private-label services: custom branding, bespoke canister sizes, and formulation adjustments within safety and regulatory limits. Minimum order quantities, labeling proofs, and lead times vary by specification—sample packs and technical packages available for verification.

QA & Testing

Our quality program includes:

Batch pressure sampling to confirm nominal 1.4 MPa output within tolerance;

Canister & valve integrity checks to prevent leaks;

Lubricity assays to verify even silicone dispersion and seal protection;

Representative field trials in reinforced gas-blowback platforms to observe wear, cycling, and mid-match stability.
Non-conforming lots are isolated and reworked or destroyed.

Safety & Handling

Storage: Keep sealed canisters in a cool, ventilated area away from open flames and direct sun. Do not store above 50°C (122°F).

Handling: Use upright; avoid puncturing, crushing, or incinerating containers. Keep away from sparks and ignition sources.

Personal Precautions: Use in well-ventilated spaces; avoid prolonged inhalation. If feeling lightheaded or ill, move to fresh air and seek care. For frostbite following liquid contact, warm the area and consult a physician.

Disposal: Follow local regulations for pressurized containers. Request SDS for detailed disposal instructions.

How to Use

Verify Compatibility: Confirm that your gun, valves and seals can safely accept 14 bar operation. Consult the manufacturer or a qualified technician if unsure.

Prepare Canister: If ambient temperature is low, warm the canister briefly in a pocket—do not apply direct heat.

Refill Upright: Insert the canister into the fill valve vertically and depress until transfer ends (you may feel cooling).

Inspect & Cycle: Check for leaks and run a few dry cycles to verify feeding and seal behavior before live firing.

Service Regularly: Inspect O-rings and seals more often than with lower-pressure gases and keep spare parts and silicone oil on hand

Target Audience

Competitive skirmishers and tactical players seeking increased range and recoil realism.

Owners of upgraded, reinforced or custom gas-blowback weapons.

Specialty retailers and tuners catering to performance-minded customers.

FAQ

Q: Can I use 1.4 MPa gas in any gas-blowback gun?
A: No. Only use this product in guns rated for higher pressures or in systems that have been reinforced. Using it in incompatible platforms may damage internals and seals.

Q: How does 1.4 MPa compare to CO₂?
A: This product is propane-based with silicone lubrication. CO- operates differently (higher pressures and temperature dependence) and places different stresses on components—1.4 MPa green gas gives increased output without CO_₂’s extreme pressure profile.

Q: Will it work in cold weather?
A: Performance decreases as temperature falls. Pre-warming the canister helps maintain consistent fills and shot-to-shot performance in cooler environments.

Q: How many shots per 500 g canister?
A: Shot counts vary by gun efficiency and user habits; expect several hundred to roughly a thousand short transfers—actual BB counts will differ.

Ordering & Contact

For samples, bulk pricing, private-labeling or technical documents (SDS/TD), contact:
info@lyxinqiu.com
We ship domestically and internationally; request product samples and specification sheets with your inquiry.

Conclusion

The 1.4 MPa Airsoft Green Gas (14 bar) is the high-output green gas option for players and technicians who want more velocity, livelier blowback and steady mid-match performance from reinforced platforms. Use only in compatible systems, follow the recommended maintenance schedule, and enjoy the extra performance without moving to CO₂.